Skip to content
Taps, mixers and spouts

Tap replacement and repairs in Cardiff

A dripping spout, a stiff handle or a mixer that sprays sideways. We repair or replace kitchen, basin and bath taps across Cardiff, and Cardiff Plumbing Limited gives you a clear price before any work starts.

Taps we fit and fix
  • Kitchen mixers and pillar taps
  • Bathroom basin and monobloc taps
  • Bath taps and bath mixers
  • Utility and cloakroom taps

Worn cartridges, perished washers, seized isolation valves and tired tap connectors, all sorted in one visit where we can.

Why it comes up

Why taps give up in Cardiff houses and flats

Older terraced streets

Victorian and Edwardian terraces in Cathays, Roath and Canton often have old isolation valves under the sink or basin that haven't been turned in years. They can seize or weep the moment we touch them, so we check them first and replace them while the tap is off.

Flats and conversions

Apartments around Cardiff Bay and the city centre, and houses split into flats, can have a single shut-off in a shared cupboard or riser. If the water can't be isolated at the tap, we need to know before the visit so we can plan around it.

Rented homes and shared houses

Taps in student lets and rental properties get used hard every day, and a slow drip often goes unreported for weeks. We repair what can be saved and replace what can't, and we work with landlords and managing agents.

Repair or replace

When a repair is enough and when a new tap is cheaper in the long run

Repair it when

  • The spout drips but the body of the tap is sound, which usually means a worn washer or ceramic cartridge.
  • The handle is stiff or gritty and the finish is still good.
  • Water weeps only from the base or spindle and replacement seals are available.
  • You like the tap and the parts still exist.

Replace it when

  • The body is pitted, corroded or flaking, or the tap wobbles on the sink or basin.
  • The same tap has been repaired more than once and is dripping again.
  • The maker no longer sells the cartridge or spare parts.
  • You are fitting a new sink, basin or worktop anyway.

Not sure which one you have? We look at it, tell you plainly which way makes sense and give you the price for that option before we pick up a spanner.

On the day

How a tap job runs on a Cardiff street

  1. Access and parking

    Tell us your street, whether parking is by permit, and if there's a flat entry buzzer or lift. We plan the visit around it so the job isn't rushed.

  2. Isolate and diagnose

    We shut off the water at the tap's own isolation valve, or the stopcock if it hasn't got one, then find out whether it's the cartridge, the seals or the tap itself.

  3. Repair or fit

    New taps go on with new flexible tap connectors, correctly sealed, with hot and cold the right way round. Missing or seized isolation valves are replaced.

  4. Test and tidy

    We run both supplies, check under the sink for drips, wipe down and take the old tap away with us.

What affects the price

What changes the cost of a tap job in Cardiff

  • The tap itselfA standard mixer is a simpler fit than a wall-mounted or bridge-style tap, which need more pipework and careful positioning.
  • Space under the sink or basinTight cupboards and boxed-in pipework, common in older terraces and compact flat kitchens, make for slower work.
  • Isolation valvesIf there are none, or they're seized, fitting new ones adds a short extra job but means the next repair is far easier.
  • Sink and basin tap holesThe new tap has to suit the number and size of holes. We check before ordering anything so you don't buy the wrong one.
  • Water shut-off in flatsIf the supply has to be isolated at a shared point, we arrange that first, which can affect timing.
Where we work in the city

Cardiff districts we cover for tap repairs

  • Cathays
  • Roath
  • Canton
  • Splott
  • Pontcanna
  • Grangetown
  • Cardiff Bay
  • Llandaff
  • Heath
  • Whitchurch
Questions

Tap questions from Cardiff homeowners

Can you replace a tap in a flat where I can't isolate the water?

Yes, but we need to plan it. Many Cardiff flats rely on a shared stopcock or a riser cupboard rather than a valve at the sink. Tell us when you call where your shut-off is, or that you don't know, and we'll arrange access before the visit. If the sink has no isolation valve, we can fit one so the next job is simpler.

Is it worth repairing an old tap in a Victorian terrace?

Often it is. A worn cartridge or washer is a small repair, and it saves replacing a tap that still works well. If the body is corroded, the tap is loose on the sink or the parts are no longer made, a new tap is the better option. We'll tell you which applies when we've seen it.

I live on a permit-parking street. Does that cause a problem?

Not if we know in advance. Mention it when you book and tell us roughly where the nearest space is. Tap jobs are usually short, but we'd rather plan the parking than rush the work.

How much does it cost to replace a tap in Cardiff?

It depends on the tap, the access under your sink or basin and whether isolation valves need replacing. We don't guess a figure over the phone. We find out what you have, then give you a clear price before we start. Cardiff Plumbing Limited won't start work until you're happy with it.

I've already bought a tap. Can you fit it?

Tell us when you call. We'll check it suits the holes in your sink or basin and the water supply before we fit it, so you're not left with a tap that doesn't fit.

Dripping or stuck tap?

Call and tell us what the tap is doing

We'll listen, tell you what we think is wrong and give you a clear price before we start.

03300437479